quadcopter Discussions

About 2436 results - Page 1 of 244
  • Issue#14402: Quadcopter - Is there any idea how many are planning on complying with the new Registration Rule?

    I know the AMA told it's what is it like 20k members to hold off on registration, but is there any idea how many out there will comply? I myself don't own anything that's 250g or more, yet lol....

  • Issue#29041: Quadcopter - Flying for profit (US)

    I know that the New proposed FAA rules seem very reasonable for using these things for commercial use. But they need to be voted on until they become law. So I was wondering what I can do in the meantime? I know that you need to petition for a Section 333 exemption to be able to do it. And even the FAA streamlines and gives blanket exemptions to certain things: https://www.faa.gov/news/updates/?newsId=82245 But I was wondering how to get FAA exemption? I have read... Flying for profit (US)...

  • Issue#43266: Quadcopter - FPV feed cut out issues. HELP!!!!!

    So I have an Argonaut AQ320 I bought from RCtimer. Here is a link... http://rctimer.com/product-1210.html I also have this camera and TX... http://rctimer.com/product-1275.html Im powering the camera and the TX off the integrated 5v pins on the PDB. everything is working great... video feeds to my goggles, everything. UNTIL I THROTTLE UP AT ALL. Complete cut out. What am I missing? Im sure it has to be something easy. HELP!!!!!!!...

  • Issue#64775: Quadcopter - Trouble getting Quad off the ground??

    Hi everyone just wanted to say I have enjoyed reading a lot of the threads on this site as I am a new member. I have a question about my Tarantula X6 quad. I have flown it maybe 10 times without issue. The other day it all of a sudden was flying erratic and then I could only get it about 2 feet off the ground. Any Idea what is happening? I was using fully charged Lipos, and never made any other changes to the quad. Thanks!!!...

  • Issue#81187: Quadcopter - Liftoff game diff from rate?

    I have downloaded liftoff and have been able to learn to fly relatively well in accro mode. But when I turn on my nighthawk pro with taranis controller and switch to accro or rate (3rd option, switch all the way down) the quad will immediately tilt hard and the quad does not perform like the program does. Is liftoff not the flight simulator like I thought it to be? Or is there perhaps something wrong with my quad?...

  • Issue#101376: Quadcopter - Turing 9x advice

    hi all, i recently purchased a Turing 9x and the recommended battery (Turnigy 2650mAh 3S 1C LLF Tx Pack) to go with it from the online website for our toys. i adapted the connecting socket as i had read through different threads and charged correctly. i connected to the TX and switched on, instantly there was smoke coming from inside the TX!!! give me strength... i haven't opened up yet but I'm not expecting to find much that will bring a smile to my face. has anyone else come across ...

  • Issue#114741: Quadcopter - Is this even possible? Need suggestions on motor etc.

    I have a z600-v3 quadcopter (320 grams and 600 mm) frame: http://www.hobbyking.com/hobbyking/...h_Mid_Crab_Landing_Gear_600mm_White_Red_.html We were looking to have an extra payload on this quadcopter (around 2 lbs not including components). I am struggling to come up with a good motor/prop size/ESC and battery combination for this. We have been using http://www.ecalc.ch/ to get a... Is this even possible? Need suggestions on motor etc....

  • Issue#135996: Quadcopter - Wltoys v303 problems

    Hello. I've been happy with the v303 up until now. Since trying to bind,I've had problems. At first only two rotors would spin at full power,now none will spin. I'm struggling to find any info to help. Can I reset to factory etc?...

  • Issue#5505: Quadcopter - Receiver output configuration

    What are the standard receiver output configurations for Mode 1? Thanks in advance...

  • Issue#486928: Quadcopter - 2205 super KV2300 brushless motor

    This is Brotherhobby,we are working on design new 2205 brushless motor,here is the spec Rotor: N52H arc magnets Configu ration:12N14P No.of Cells(Lipo):3-5S Wiring config: 2300KV = 1 x 0.45mm 11.5 turns Delta DLRK Stator: 25 x 0.2mm Kawasaki silicon steel Bearings: Japanese NSK 3 x 8 x 4mm Metal:7075 aluminium Any interested or questions,please send us [email protected]..

  • Issue#507290: Quadcopter - Kaideng K70C SkyWarrior Replacement Motor Issue

    Hello All, This is my first post so if I could do something better next time please let me know. I'm having trouble with my Kaideng K70C. It worked great out of the box, even when replacing the stock camera with a Xiaomi Yi Action Camera, which is noticeably heavier than the stock camera. Eventually the K70 started having trouble staying airborne, and I had to manually pull it back and to the left, as it was naturally drifting to the front and right. After checking the resistance of... K...

  • Issue#525286: Quadcopter - DJI 4 Care

    Hi guys, I’m planning to buy myself a new DJI Phantom 4 but am struggling with care packages for drones and insurances and so on. Well, I got some information bout it in that article http://www.drohnen.de/11319/dji-care-fuer-dji-phantom-4-garantieservice-und-kaskoversicherung/ but really don’t know whether it is worth the price and if it is necessary. Also I’d like to know when DJI care package is valid after purchase…..so, maybe someone of you has got some experience concerning... DJI...

  • Issue#540104: Radio Control - quadcopter fell in pool of water

    While flying, (well actually right after the flying bit) my quad crashed in a puddle of water and was completely submerged. I unplugged the battery and tried to shake off as much water as i could. Then I let it dry for an hour. Now when I plug the battery in, it beeps as if normal, then it keeps giving a beep every second. The motors give a small jerk, but don't spin anymore (none of the 4). It's a Eachine falcon 250, so a CC3D standard flightcontroller. The leds on the electronics part still bl...

  • Issue#555601: Quadcopter - Various, motors, ESCs, flight controllers - enough to build at least 4 - 450/500 frame

    During building and trying stuff, delays with eBay shipping to me and pushing me to HobbyKing and other faster - but more expensive shipping online stores - I have accumulated a lot of stuff I am not using or needing. after settling on 1 450 and 1 500 alien frame I am rebuilding and taking them both to GPS. So I figure if I can sell on some of the collection of various quad building parts - I can put $$$$ towards a top range radio. I also have three radios, a channel... Various, motors, ESCs,...

  • Issue#588984: Quadcopter - Drone Park Coming to Houston!

    Hello Quadcopter Forum, Have you ever had trouble finding a place to fly? Or have strained to understand the ever changing FAA regulations? Fear no more because Drone Parks Worldwide provides a safe, legal enclosed environment for drone pilots like you! The days of not being able to find a place to fly will be left in the past with our patent pending technology that enables drone pilots to fly free while still being protected. Our Drone Parks will allow existing drone pilots and the... Drone...

  • Issue#619459: Radio Control - F450 Quadcopter

    F450 frame 4 Turnigy MultiStar 2213-980kv motors 4 Turnigy Multistar 30amp escs 1 DJI Naza-M Lite Flight Controller 1 FrSky X8r Receiver 1 Set of 10 inch Gemfan Props 2 Readymaderc 4200mah Batteries LED lights around front and back arms 1 Immersion RC 600mw video transmitter The F450 only has a couple of hours of flight time, I built this quad and decided I liked the smaller 250 size builds better so now I don't have a need for this one. the ImmersionRC vtx has all of the wires included but a...

  • Issue#645283: Radio Control - Quadcopter problem

    Hello all I am new to quad copters and I have just taken the camera and antenna off my quad now the motors keep twitching and beeping at me is there some thing else I need to do so it sets up Thanks in advance...

  • Issue#674120: Quadcopter - Do you have any good recommendation for the RC Quadcopter?

    Do you have any good recommendation for the RC Quadcopter? Yesterday,I saw a discount on www.tabletexpress.com. The original price of AKASO X5C is $49.99,now only $27.99. How about AKASO X5C?...

  • Issue#699698: Quadcopter - Fox tech Pentacopter. 85mph out of the box!

    ...

  • Issue#722242: Radio Control - Custom Tarot Iron Man Carbon Fiber Quadcopter + Xoar Props

    Tarot Iron Man Carbon Fiber Custom Frame Reduced to 12'' props Used , very Good Condition , Inlcude Xoar Propeller set U.s Fast Shipping Attached Thumbnails Views: N/A Views: N/A Views: N/A Views: N/A Views: N/A ...

  • Issue#746175: Quadcopter - BatteryBank + Battery's For Blade Nano QX 3D

    Hey all!, today i bought my first drone, the Blade nano qx 3d! After the first flight i realized my battery gets empty really fast and charging the battery takes alot of time! I wanna buy some more battery's for my quad and a bank so i can charge them at the same time So can you guys give me advice on what battery's are the best for the blade nano qx 3d and wich bank is the best for me to buy? (currently i have an 200mah 1s 3.7v 30c battery) I want like 4-5 battery's max and ...

  • Issue#773615: Radio Control - JXD 512W Mini UFO Remote Control RC Quadcopter 0.3MP FPV Wifi

    JXD 512W features for its super unique and mini design, who doesn't want an adorable mini UFO? Don't be afraid of collision! Strive for your airspace and enjoy it! Main Features: Differ from 512V, 512W can not only be controlled by transmitter, but also by smart phone. Forget to take the transmitter out? Don't worry, you can play it by phone now. Mini design with a 0.3-mega-pixel camera, this quadcopter can be taken to everywhere as you want. Thus, you can record photos and videos during every ...

  • Issue#792990: Quadcopter - Channel Mapping for FS-i6 Transmitter

    I have the FS-i6 transmitter and I am trying to map it in Cleanflight. I am having quite a lot of trouble. I have read many other forums, none of which have worked. Currently I am mapping like this: 4ARTE123 AND I have all of the channels reversed on my RX. This gets everything correct except what should be roll is AUX1. So, how can I correctly map the FS-i6 transmitter using Cleanflight (I have a Naze32 rev6 Acro if it is relevant)....

  • Issue#151985: Radio Control - Kai Deng K80 Quadcopter (Obstacle Avoidance /GYRO system/FPV)

    Kai Deng have leak some pics about their new FPV RC product. To me, the most amazing features is the Obstacle Avoidance and the GYRO system! Very curious of how it performs!:D But anyway, the price is not out yet, I think it's crucial as well.:rolleyes: Here are some pictures, take a look.:popcorn: Main features: ▪Radio control technology for indoor/outdoor play ▪Advanced built-in GYRO system ▪Obstacle Avoidance ▪ascend/ descend, turn left/ right, f...

  • Issue#797693: Quadcopter - Game of drones: Local quadcopter racers are winning big and cashing in on hot new sport

    Albuquerque Journal​... Game of drones: Local quadcopter racers are winning big and cashing in on hot new sport -......