post Discussions

About 3017 results - Page 1 of 302
  • Issue#9991: Autodesk - Post Processor for Axiom Precision CNC

    I have an Axiom Precision CNC, that uses a RichAuto A11 DSP controller. I'm looking for a post processor so I can continue using Fusion. If it helps, this is the same controller used with the Laguna IQ HHC. I have a post for Rhino but I'd prefer to use Fusion...

  • Issue#1042800: Skype - My friend can't hear me but I can hear him. See more in the post.

    Just to let you know in advance, I'm on a windows PC, it's a gaming Pc, custom built, if that matters. Okay, so I went to my audio settings on Skype to check and see if Skype was even picking up audio. It showed that it was picking up sound just fine, just not letting my friend hear it....

  • Issue#1059572: [Unity API] Why doesn't UnityWebRequest support byte array post data?

    We know that WWW has a contructor with a byte[] parameter as the post data, and it's quite handy to deal with encoding senstive servers. Why doesn't UnityWebRequest.Post has a similar overload? I know the string post data version but it'll cause our Django server to complain....

  • Issue#1076782: This is my last try to get my computer to post. help if you know anything

    So i have made threads before (2 of them) but this will be the last and honestly if i dont solve this or it magically decides to start working i will just buy a new mobo or return mine (its so bad that i dont even know how to do that)   problem start:    I made a new computer. its all great. i finish building it. i go to bios. i install windows. im all good.   before i build my pc. i test my nvdiia gpu on a friends pc. its all working fine.   i shut off th...

  • Issue#1086982: Radio Control - New to Airliners, can you post as many......RTF's

    Can everyone post as many "RTF Airliners/ Companies" + ones that you can just bind w/Link: thanks in advance......:popcorn:...

  • Issue#1102276: I do not want to receive post from giffgaff with publicity

    How can I cancel mail from giffgaff? I mean post, letters to home...

  • Issue#1120901: Post-Thoughts on SSD Upgrade

    3: After spending years with the slow startup with the OS and programs, I finally made  the decision about 2 months ago to get a Sandisk Ultra II 240Gig ssd. 3: I feel like an olympic runner. Good lord its amazing. ...

  • Issue#1138258: Autodesk - edit post from metric to imperial and the other way around?

    Hi everyone.Is there a way to edit a post from metric to imperial and then back again?Lets say that I get a post from a user in the states thats imperial, and i want to change is to metric, is that possible?Thank you very much ...

  • Issue#1151691: Politico: ABC News/Washington Post Poll: Clinton just as unpopular as Trump with voters

    I find this interesting. Poll: Clinton just as unpopular as Trump with voters http://www.politico.com/story/2016/08/poll-clinton-popularity-227578 Approximately 46 percent of registered voters said they had a favorable opinion of Clinton in early August, dropping eight points to 38 percent in the latest survey, with nearly six in 10 (59 percent) holding an unfavorable opinion of the former secretary of state, an increase of...​ Politico: ABC News/Washington Post Poll: Clinton just as u...

  • Issue#1167633: Lenovo - why can't I post topics in y series thread

    i had a question for my lenovo y50 and everytime i post a topic in the thread, it deletes it within seconds?...

  • Issue#1183818: Autodesk - Pending Post Migration | FBX Review and FBX Plug-ins Import-Export

    In an effort to create a better customer experience and provide maximum visibility for new questions and existing answers, we will  be moving all posts from the FBX Review and FBX Plug-ins Import-Export forums into the FBX SDK forum on Thursday September 8th, between 9pm and 12am EST. At that time, the FBX Review and FBX Plug-ins Import-Export forums will be archived and closed for new topics.   Additionally, we will rename the FBX SDK forum into simply FBX.  We are taki...

  • Issue#166050: Briggs and Stratton 675 Series Repair: Can someone post a picture of the throttle mechanism/springs?

    I just recently took my B&S 675 apart to clean and check some things and in the midst of putting the engine back together one of the two "springs" for the throttle cable that connects to the carburetor came off. I can not for the life of me figure out how to put the bastard back on correctly, can anyone post a picture of the throttle cable springs connecting to the carburetor on this engine? This engine is on my Briggs & Stratton Earthquake auger with the 675 series engine. Th...

  • Issue#184834: Zynq zc706 uboot POST subsystem

    Good day!   Recently I need to turn on u-boot POST-subsystem as fully as possible. I've got to find some examples to turn on DDR test but I can't find anything to turn on watchdog and QSPI tests. There is no zynq watchdog sources in the u-boot-xlnx repository. Also it isn't clear, how to run QSPI test because this test (post/drivers/flash.c) requires CFI driver depends on existence of the NOR-memory but QSPI is not NOR. Did anybody do something similar yet? If yes, could you help with ...

  • Issue#205281: 13000th post!

    lai come gxgx moi...treat chiu all jiak buffet :D Spoiler! ...

  • Issue#222912: Intel - W2600CR won't Boot post code 35h

    Hi I have purchased an Intel W2600CR board - PBA G21602-306 and cant get it to boot.It either comes up with Orange System Status LED and LSB lit or I get Green System Staus LED and post code 35h (LSB,#2,#4,#5). I have tried a single E5-2670 and dual E5-2670 CPUs. (V1 CPUs)If I remove the memory I get 3 beeps as expected.The memory I have in is Hynix 4GB 2Rx4 PC3-10600R-9-10-E1 at the moment just a single DIMM.But I have aslo tried up to 4 DIMS from my Dell C6100 with no success. A...

  • Issue#242064: Adobe - I just post to say thank you

    I dont know what forum I can tell. last time I ask about CC App can't open and can't uninstall but now I can slove it I just want to say thank you for someone who help me Thank you again...

  • Issue#257716: Hardware - Sabertooth powers on then off - No Post

    As the title states, I have a Sabertooth board that wont post. No video or beeps. Red LED indicator lights on CPU, then to Mem OK, then CPU again followed by an instant off. Tested all components on another working Gigabyte board and it worked perfectly (actually even better because the 9590 seemed a bit unstable). Used 3x PSU's, 3x Video Cards, 2x CPU's, 3x Cases, and cleared CMOS; all were the same result on the Saber. Running with 8120, Corsiar 750w (other previous PSU as well), Vengence 4...

  • Issue#276847: Autodesk - Haas DS-30SSY Stock post tweak?

     I may have one minor issue that I have found with the stock Haas DS-30SSY mill-turn post.   I have attached my example part that hopefully helps to illustrate the issue.   When milling axially with a live tool, the post will detirmine if the toolpath will fit within the X-Y envelope of the machine, then detirmine whether to use G112 polar interpolation, or if it should simply use the X-Y axes.   When the post detirmines that it can use X-Y only, It doesn't loc...

  • Issue#296282: Unity - The difference proper lighting and post processing can make

    Here are 4 images that show the difference proper lighting and camera post processing can make to your scene. Its very often overlooked by new Unity users but can make all the difference between a boring scene and something special. This is what is being used in both images, in order of importance. 1) AzureSky 2) Filmic Tonemapping Deluxe 3) Ultimate Bloom (you could do without this) 4) RTPv3 (has self shadowing shader thingy) 5) Scene View FX (makes getting everything setup 1000x easier)... ...

  • Issue#315965: Hardware - $2500 post production/video editing PC

    Hi everyone, I have finally looked into building a PC. I am handling high resolution video and possibly 4k video. I am very new to the PC building world haha and I was wondering if you guys could help give me parts to build a solid and fast PC for my video editing. I don't really know about parts and video cards and all that. My budget is $2500, thanks....

  • Issue#333163: Unity - Coroutines and returning JSON data from POST

    I'm using WWW to get JSON data from a URL using POST. The connection works fine and the data is returned (location data). My problem arises when I run the game and the WWW does not have enough time to return before the location of the in-game object is set. This lead me to look into coroutines. I've tried to implement a coroutine, but can't figure out how to return data from it. The code I'm using to get the data in the coroutine is: Code (csharp):       &...

  • Issue#346947: Hardware - Is POST screen time dependant on your SSD speed or ROM speed?

    Title...   I was wondering if the 10 second POST is due to my SSD or ROM, seeing as my SSD is quick in everything but the POST seems so slow? ...

  • Issue#360804: Moto x post lollipop telephony issues with pace modem

    Hello, been struggling with telephony issues since lollipop update. Using moto x 1st gen. Did factory reset. Afterwards phone worked perfectly in raw state with no apps, including google. Got notification to do rw app update, once done, problems...

  • Issue#378362: Marvel and DC movie storyline plans: Post Civil War, Thanos and Darkseid?

    What storylines do you think DC and Marvel movies will focus on when they are all done with the Civil War, Thanos and Darkseid storylines? Besides the X-men movies which have been doing a phenomenal job adapting famous X-Men storylines, what other storylines do you think the Justice League and Avengers characters should focus on next? It would be great if DC adapts Alex Ross' Justice and Kingdom Come next. Even as they are making an animated Kingdom Come movie, it shouldnt prevent them from ma...

  • Issue#58338: Unable to post photos to Facebook from iPhone photo app

    I have an iPhone 6s, which I got last fall when they first came out. I have been using iPhones since the iPhone 4 and this is the very first one that I have ever had this problem with. My photos app will NOT post photos to my Facebook account. If I try to share a photo to Facebook from my iPhone photo album, it either just will not post it at all and not give me any error messages (which it now just did), but other times it will give me a message saying "there was a problem sharing your... ...